Display lldp local device information – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 205
Table 48. LLDP statistics information (Continued)
Description
Field
The total number of LLDP TLVs received that are of type UPOE.
TLV UPOE
The total number of LLDP TLVs received that are of type NTGR.
TLV NTGR
Display LLDP local device information
You can display LLDP local device information, which is information that the switch itself,
or an interface of the switch, advertises.
To display LLDP local device information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > Local Device Information.
The Local Device Information page displays.
6. From the Interface menu, select an interface on which the transmission of LLDP
frames is enabled.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 49. LLDP local device information
Description
Field
The switch identifier is the MAC address of the switch (see the following
field).
Chassis ID Subtype
The MAC address of the switch.
Chassis ID
Main User Manual
205
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual