NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 353)

To add port, LAG, and VLAN descriptions:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Ports > Port Description.
The Port Description page displays.
6. Select whether to display physical interfaces, LAGs, VLANs, or all by clicking one of
the following links above the table heading:
• 1 or Unit ID for a stacked switch:
- 1: If no switch stack is configured, the physical interfaces for the switch are
displayed.
- Unit ID for a stacked switch: If a switch stack is configured, the physical
interfaces for the switch with the selected stack unit ID are displayed.
• LAG: Only LAGs are displayed.
• VLANS: Only VLANs are displayed.
• All: Physical interfaces, LAGs, and VLANs are displayed, or for a switch stack,
physical interfaces on all switches in the stack, LAGs, and VLANs are displayed.
7. Select one or more interfaces or VLANs by taking one of the following actions:
• To configure a single interface or VLAN, select the check box associated with the
interface or VLAN, or type the interface or VLAN number in the Go To Interface
field and click the Go button.
• To configure multiple interfaces or VLANs with the same settings, select the check
box associated with each interface or VLAN.
• To configure all interfaces, VLANs, or both interfaces and VLANs with the same
settings, select the check box in the heading row.
8. In the Description field, enter a description of up to 64 characters.
Main User Manual 353 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual