NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 277)

To view iSCSI sessions:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > iSCSI > Advanced > Sessions.
The iSCSI Sessions page displays. If no sessions are present, the page displays No
iSCSI Sessions Are Available .
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Description Field
The target name. Target Name
The initiator name. Initiator Name
The iSCSI session identifier. This is the ID that an initiator assigns to its session endpoint. Initiator Session ID
(ISID)
View detailed information about iSCSI
sessions
You can view detailed information about active iSCSI sessions.
To view detailed information about iSCSI sessions:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
Main User Manual 277 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual