NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 498)

(Continued)
Description Field
The 32-bit unsigned sum of the link state advertisement checksum contained in this
area’s link state database. This sum excludes external (Type 5 LSAs) link state
advertisements. You can use the sum to determine if a change occurred in the link
state database of the switch, and to compare the link state database of two devices. Area LSA Checksum
This field displays if and how the NSSA border router translates Type 7 LSAs into Type
5 LSAs:
• Enabled: The NSSA border router’s translator role is set to always.
• Elected: The candidate NSSA border router is translating Type 7 LSAs into Type 5
LSAs.
• Disabled: The candidate NSSA border router is not translating Type 7 LSAs into
Type 5 LSAs.
Translator State
Add an OSPFv3 area range
You add an OSPFv3 area range by setting an area ID with an address range (an IPv6
prefix). You then also set the LSAs that are associated with the area and whether the
address range is advertised outside the area.
You can associate an OSPFv3 area range with a common area (see Add or delete an
OSPFv3 common area ID on page 493), stub area (see Add an OSPFv3 stub area on page
494), or NSSA area (see Add an OSPFv3 NSSA area on page 496).
To add an OSPFv3 area range:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > OSPFv3 > Advanced > Area Range Configuration.
The OSPFv3 Area Range Configuration page displays.
Main User Manual 498 Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual