Delete an extended ipv4 acl rule – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 819

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > ACL > Advanced > IP Extended Rules.

The IP Extended Rules page displays.

6. From the ACL ID/Name menu, select the ACL that includes the rule that you want

to modify.

7. In the Extended ACL Rule Table, click the rule.

The rule is a hyperlink. The Extended ACL Rule Configuration page displays.

8. Modify the extended IP ACL rule criteria.

9. Click the Apply button.

Your settings are saved.

10. To save the settings to the running configuration, click the Save icon.

Delete an extended IPv4 ACL rule

You can delete an extended IPv4 ACL rule that you no longer need.

To delete an extended IPv4 ACL rule:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.