beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 339

background image

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Switching > MVR > Basic > MVR Configuration.

The MVR Configuration page displays.

6. From the MVR Running menu, select Enable or Disable to specify if MVR is globally

enabled or disabled on the switch

The default is Disable.

7. In the MVR Multicast VLAN field, specify the VLAN on which MVR multicast data is

received.

All source ports belong to this VLAN. The range is from 1 to 4093. The default 1.

8. In the MVR Global Query Response Time field, set the period that the switch must

wait for an IGMP group membership report from an interface before removing the
interface as a member from the multicast group.

This period applies only to the removal of the interface from the receiver port on
the switch. When an IGMP query is sent from a receiver port, the switch waits for the
default or configured MVR query time for an IGMP group membership report before
removing the interface as a member from the multicast group. The period is equal
to a tenths of a second. The range is from 1 to 100 tenths. The default is 5 tenths or
one-half.

9. From the MVR Mode menu, select compatible or dynamic to specify the MVR mode

of operation.

Select compatible (the default mode) to block IGMP group membership reports on
source ports. Select dynamic to allow IGMP group membership reports on source
ports.

10. Click the Apply button.

Your settings are saved.

11. To save the settings to the running configuration, click the Save icon.

12. To refresh the page, click the Refresh button.

The following table describes the view-only fields on the page.

Main User Manual

339

Configure Switching Information

Fully Managed Switches M4350 Series Main User Manual