NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 354)

9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 87. Port description information
Description Field
The MAC address of the interface or VLAN. MAC Address
The bit offset value that corresponds to the interface or VLAN when the
MIB object type PortList is used to manage in SNMP. PortList Bit Offset
The interface index associated with the interface or VLAN. ifIndex
Display transceiver module information
To enable high-speed fiber and Gigabit Ethernet, short- and long-distance connections
on the switch, SFP, SFP+, and SFP28 fiber ports can accommodate standard 1G SFP,
10G SFP+, and SFP28 25G transceiver modules. You can view the transceiver module
information for all fiber ports on the switch.
To view transceiver module information:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Ports > Port Transceiver.
The Port Transceiver page displays.
6. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Main User Manual 354 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual