NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 50)

4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Stacking > Advanced > Stack-port Configuration.
The Stack-port Configuration page displays.
6. To display the ports of a specific stacked switch, select the unit ID for the stacked
switch, or select the All link to display all ports for all stacked switches.
The ports for the selected switch or switches display.
7. Select the check box for one or more ports:
8. From the Stack Trunk Hash Mode menu, select the mode
• 1 Src MAC, VLAN, EType, incoming port: The source MAC address, VLAN,
EtherType, and incoming port associated with the packet
• 2 Dest MAC, VLAN, EType, incoming port: The destination MAC address, VLAN,
EtherType, and incoming port associated with the packet
• 3 Src/Dest MAC, VLAN, EType, incoming port: The source and destination
MAC addresses, VLAN, EtherType, and incoming port associated with the packet
• 4 Src IP and Src TCP/UDP Port fields: The source IP address and source
TCP/UDP port fields of the packet
• 5 Dest IP and Dest TCP/UDP Port fields: The destination IP address and
destination TCP/UDP port fields of the packet
• 6 Src/Dest IP and TCP/UDP Port fields: The source and destination IP addresses
and source and destination TCP/UDP port fields of the packet.
• 7 Enhanced hashing mode: Dynamic selections of fields based on the packet
flow. For L2 packets, the source and destination MAC addresses are used; for IP
packets, the source and destination IP addresses and TCP/UDP port fields are
used.
9. Click the Apply button.
Your settings are saved.
10. To save the settings to the running configuration, click the Save icon.
Display information about the stack
configuration
You can display information about the stack configuration.
Main User Manual 50 Manage Stacking
Fully Managed Switches M4350 Series Main User Manual