NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 292)

Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Delete an MST instance
You can delete an MST instance that you no longer need.
To delete an MST instance:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > STP > Advanced > MST Configuration.
The MST Configuration page display.
6. Select the check box that is associated with the MST instance.
7. Click the Delete button.
The MST instance is deleted.
8. To save the settings to the running configuration, click the Save icon.
Configure and display the interface settings
for an MST instance
You can configure and display the interface settings for a Multiple Spanning Tree (MST)
instance.
An interface can become diagnostically disabled (D-Disable) when a severe error
condition occurs for DOT1S. The most common cause is when BPDU flooding occurs.
The flooding criteria are such that DOT1S receives more than 15 BPDUs in a 3-second
interval. (Other causes for a DOT1S D-Disable condition are very rare.)
Main User Manual 292 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual