beautypg.com

Set the dynamic address aging interval – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 346

background image

6. Use the Search menu and field to search for a MAC address, VLAN ID, or interface

number:

Search by MAC Address: From the Search menu, select MAC Address, and
enter the 6-byte hexadecimal MAC address in two-digit groups separated by
colons, for example, 01:23:45:67:89:AB. Then click the Go button.

If the address exists, that entry is displayed as the first entry followed by the
remaining (higher) MAC addresses. An exact match is required.

Search VLAN ID: From the Search menu, select VLAN ID, and enter the VLAN
ID, for example, 100. Then click the Go button.

Search Interface: From the Search menu, select Port, and enter the interface
ID using the respective interface naming convention (for example, 0/2). Then
click the Go button.

7. To remove the dynamic entries from the MAC address table, click the Clear button.

8. To save the settings to the running configuration, click the Save icon.

9. To refresh the page, click the Refresh button.

The following table describes the view-only fields on the page.

Table 85. MAC address table information

Description

Field

The number of total MAC addresses learned or configured.

Total MAC Address

The unicast MAC address for which the switch holds forwarding information, filtering
information, or both forwarding and filtering information. The format is a 6-byte MAC
address that is separated by colons, for example 01:23:45:67:89:AB.

MAC Address

The VLAN ID associated with the MAC address.

VLAN ID

The interface on which the address was learned.

Port

The status of this entry:

Static: The MAC address was added by the switch or a user and cannot be relearned.

Learned: The MAC address was learned, and is being used.

Management: The management MAC address.

Status

Set the dynamic address aging interval

You can set the address aging interval for the forwarding database. This is the time-out
period in seconds for aging out dynamically learned forwarding information.

To set the dynamic address aging interval:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

Main User Manual

346

Configure Switching Information

Fully Managed Switches M4350 Series Main User Manual