NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 400)

Table 102. IPv4 routing configuration information
Description Field
The default value inserted into the Time-To-Live field of the IP header of
datagrams originated by the switch, if a TTL value is not supplied by the
transport layer protocol. Default Time to Live
The maximum number of hops supported by the switch. Maximum Next Hops
The maximum number of routes supported by the switch. Maximum Routes
The maximum number of static routes supported by the switch. Maximum Static Routes
Display the IPv4 statistics
You can display the IPv4 routing statics for the switch.
To display the IPv4 routing statistics for the switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IP > Basic > Statistics.
The Statistics page displays.
The following table describes the view-only fields on the page.
Main User Manual 400 Manage Routing
Fully Managed Switches M4350 Series Main User Manual