beautypg.com

Configure the ospfv3 route redistribution – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 513

background image

(Continued)

Description

Field

Backup Designated Router: The switch is the backup designated router on the attached network. The switch
is promoted to designated router if the current designated router fails. The switch establishes adjacencies to
all other routers attached to the network. The backup designated router performs slightly different functions
during the LSA flooding, as compared to the designated router.

Other Designated Router: The interface is connected to a broadcast on which other routers are the designated
router and backup designated router. The switch attempts to form adjacencies to both the designated router
and the backup designated router.

The metric value that is used by the virtual link to compute the shortest paths.

Metric

Configure the OSPFv3 route redistribution

Route redistribution (RR) lets the switch share routing information between locally
connected routers (or routing interfaces) and information about static routes.

To configure the OSPFv3 route redistribution:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Routing > OSPFv3 > Advanced > Route Redistribution.

The OSPFv3 Route Redistribution page displays.

6. Next to the Source field, select the check box for one or more types of source routes

to which the configuration applies:

Connected: Routes between locally connected routers (or routing interfaces).

Static: Routes that were manually configured.

7. From the Redistribute menu, select if redistribution is enabled:

Main User Manual

513

Configure OSPF and OSPFv3

Fully Managed Switches M4350 Series Main User Manual