NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 323)

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Multicast > IGMP Snooping Querier > IGMP Snooping Group
Table.
The IGMP Snooping Group Table page displays.
6. To display information for a specific VLAN or interface, do the following:
a. From the Search menu, select VLAN ID or interface.
b. In the field, enter the VLAN ID or interface number.
c. Click the GO button.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 78. IGMP snooping group information
Description Field
The ID of the VLAN on which the host sends IGMP member join requests. VLAN ID
The IP address and MAC address of the host that sends IGMP member join requests. Subscriber
The multicast IP address and MAC address that the subscriber is registered to. MC Group
The interface on which the IGMP member join requests us detected. Interface
The IGMP protocol version. Type
The time that the most recent update for this host expires. Timeout (secs)
Multicast Listener Discovery
snooping
In IPv6 networks, Multicast Listener Discovery (MLD) snooping performs a similar function
as IGMP in IPv4 networks. With MLD snooping, IPv6 multicast data is selectively forwarded
to ports that are configured to receive the data, instead of being flooded to all ports in
a VLAN. The ports are determined by snooping IPv6 multicast control packets.
A multicast listener is a device that is configured to receive IPv6 multicast packets. MLD
is used by IPv6 multicast routers to discover the presence of multicast listeners on its
directly-attached links and to discover which multicast packets are of interest to
neighboring devices.
Main User Manual 323 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual