NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 838)

Display or clear detailed statistics for a port
For a specific port, you can display a variety of per-port traffic statistics or clear the
statistics.
To display and clear detailed statistics for a port:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Monitoring > Ports > Port Detailed Statistics.
The Port Detailed Statistics page displays.
6. From the Interface menu, select the interface (a physical port or LAG) for which you
want to display the statistics.
7. From the MST ID menu, select the MST ID associated with the interface (if available).
8. To refresh the page, click the Refresh button.
9. To clear all the counters, click the Clear button.
All statistics for the port are reset to the default values.
10. To save the settings to the running configuration, click the Save icon.
The following table describes the detailed port statistics displayed on the page.
Table 182. Port detailed statistics information
Description Field
The ifIndex of the interface table entry associated with the port. ifIndex
The port is either Normal or one of the following:
• Mirrored: The port is a mirrored port in a port mirroring configuration.
• Probe: The port is the probe port in a port mirroring configuration.
• Port Channel: The port is a member of a LAG.
Port Type
Main User Manual 838 Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual