beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 550

background image

8. In the Priority field, specify the priority for the BSR candidate.

The range is from 0 to 255. The default is 0.

9. In the Advertisement Interval field, specify the period in seconds between

advertisements.

The range is from 1 to 16383. The default is 60.

10. Click the Apply button.

Your settings are saved.

11. To save the settings to the running configuration, click the Save icon.

12. To refresh the page, click the Refresh button.

The following table describes the view-only fields on the page.

Table 134. IPv4 PIM BSR candidate configuration information

Description

Field

The time (in hours, minutes and seconds) after which the learned elected
BSR expires.

BSR Expiry Time (hh:mm:ss)

The IPv4 address of the elected BSR.

IP Address

The time (in hours, minutes, and seconds) after which the next bootstrap
message is due from the BSR.

Next bootstrap Message
(hh:mm:ss)

The time (in hours, minutes, and seconds) after which the next candidate
RP advertisement is sent.

Next Candidate RP Advertisement
(hh:mm:ss)

Delete an IPv4 PIM bootstrap router
candidate configuration

You can delete an IPv4 PIM bootstrap router (BSR) candidate configuration from an
interface.

To delete an IPv4 PIM BSR candidate configuration from an interface:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

Main User Manual

550

Configure Multicast Routing

Fully Managed Switches M4350 Series Main User Manual