NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 255)

• Enable: Voice traffic is allowed on an unauthorized voice VLAN interface. The
default is Enable.
• Disable: Voice traffic is allowed only an authorized voice VLAN interface, for
which dot1x must be enabled (see Manage port authentication on individual
ports on page 691).
12. In the DSCP Value field, configure the DSCP value for the interface.
The range is from 0 to 64. The default is 0.
13. Click the Apply button.
Your settings are saved.
The Operational State field displays the operational status of the voice VLAN on the
interface.
14. To save the settings to the running configuration, click the Save icon.
Configure Generic Attribute Registration
Protocol
Generic Attribute Registration Protocol (GARP) allows network devices to share
information such as VLAN IDs and multicast group membership across a bridged LAN.
That is, GARP participants can register and deregister attribute values within the LAN.
When a GARP participant declares or withdraws an attribute, the attribute value is
recorded for that attribute and for the interface from which the declaration or withdrawal
was made.
The following applies to GARP:
• Registration occurs only on interfaces that receive a GARP PDU with a declaration
or withdrawal.
• Deregistration occurs only if all GARP participants that are connected to the same
LAN segment as the interface withdraw the declaration.
Configure GARP switch settings
You can globally enable GARP VLAN registration protocol (GVRP) and GARP multicast
registration protocol (GMRP) on the switch.
To configure GARP switch settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual 255 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual