NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 638)

Configure a RADIUS authentication server
on the switch
You can configure and display various settings for communication between the switch
and a RADIUS authentication server.
Add a RADIUS authentication server to the switch
You can add information about a RADIUS authentication server to the switch and display
or reset the RADIUS authentication server statistics.
To add a RADIUS authentication server to the switch and display or reset the RADIUS
authentication server statistics:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Server Configuration.
The Server Configuration page displays.
6. In the Radius Server IP Address field, specify the IP address of the RADIUS server.
7. In the Radius Server Name field, specify a name for the RADIUS server.
This name helps you to identify the RADIUS server.
8. In the Port field, specify the UDP port number of the RADIUS authentication server.
The range is from 1 to 65535.
9. From the Secret Configured menu, select Yes.
You must select Yes before you can configure the RADIUS secret. After you add the
RADIUS server, this field indicates whether the shared secret for this server was
configured.
Main User Manual 638 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual