NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 406
Table 104. IP Interface Configuration
Description
Field
The VLAN ID for the interface
VLAN ID
The physical link data rate of the interface
Link Speed Data Rate
Indicates if OSPF is enabled (Enable) or disabled (Disable) for the interface
OSPF Admin Mode
The active or inactive state of the interface (Active or Inactive)
Active State
The MAC address that is associated with the interface
MAC Address
The link-up or link-down state of the interface. (Link Up or Link Down.) An
interface is considered active if the link is up and the interface is in the
forwarding state. An interface that is configured for stacking in the
detached state (Detach).
Link State
The link status of the routing interface (Up or Down)
Routing Interface Status
Delete the routing IP address from an IPv4
routing interface
You can delete the routing IP address from one or more IPv4 routing interfaces.
To delete the routing IP address from one or more IPv4 routing interfaces:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > IP > Advanced > IP Interface Configuration.
The IP Interface Configuration page displays.
6. Select whether to display physical interfaces, VLANs, or both by clicking one of the
following links above the table heading:
Main User Manual
406
Manage Routing
Fully Managed Switches M4350 Series Main User Manual