beautypg.com

Manage software images, Copy a software image – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 895

background image

The file name can contain up to 80 characters.

15. Click the Apply button.

The file transfer begins.

The page displays information about the progress of the file transfer. The page
refreshes automatically when the file transfer completes.

16. To save the settings to the running configuration, click the Save icon.

Manage software images

The switch maintains two versions of the switch software in permanent storage. One
image is the active image, and the second image is the backup image. The active image
is loaded when the switch starts or reboots. This feature reduces switch down time when
you are upgrading the switch software.

Copy a software image

You can copy a software image from one location (primary or backup) to another.

To copy a software image:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Maintenance > Image Management > Copy.

The Copy page displays.

6. Select the Source Image Image1 or Image2 radio button to specify the image to

be copied.

Main User Manual

895

Maintenance and
Troubleshooting

Fully Managed Switches M4350 Series Main User Manual