Configure the poe ports settings – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 170
Table 43. PoE information (Continued)
Description
Field
The power status (Off or On)
Power Status
The maximum power in watts the switch can deliver to all ports.
Total Power Available (W)
If the consumed power is below the threshold power, the switch can power up
another port. The consumed power can be between the nominal and threshold
power. The threshold power is displayed in watts.
Note: The threshold power value is determined by the value that you enter in
the System Usage Threshold field.
Threshold Power (W)
Total power in watts that is being delivered to all ports.
Consumed Power (W)
Configure the PoE ports settings
To configure the PoE ports settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > PoE > Advanced > PoE Port Configuration.
The PoE Port Configuration page displays.
6. If a stack is configured, select whether to display the physical interfaces for one switch
or for all switches in the stack:
•
Unit ID for a stacked switch: The physical interfaces for the switch with the
selected stack unit ID are displayed.
If no switch stack is configured, the only option is unit ID 1.
•
All: The physical interfaces for all switches in the stack are displayed.
If no switch stack is configured, the All option does not have any effect.
Main User Manual
170
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual