Bonjour settings, Enable or disable bonjour – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 121
Table 30. Green Ethernet feature summary information
Description
Field
1, or the unit ID for a stacked switch
Unit
The green features that are supported on the switch:
• Energy-Detect
• EEE (Energy Efficient Ethernet)
• LPI-History (EEE low power idle history)
• LLDP-Cap-Exchg (EEE LLDP capability exchange)
• Pwr-Usg-Est (Power usage estimates).
Green Features supported on this
unit
The following table describes the view-only fields in the Green Ethernet Interface
Summary section.
Table 31. Green Ethernet interface summary information
Description
Field
The interface for which information is displayed.
Interface
Indicates the status of the mode (Enable or Disable).
If the mode is enabled and a port link is down, the underlying physical
layer goes down for a short period and then checks for port link pulses
again so that auto-negotiation remains possible. In this way, the switch
saves power when no link partner is present for the port.
Energy Detect Admin Mode
The operational state (Active or Inactive) of the Energy Detect mode.
Energy Detect Operational Status
Indicates the status of the mode (Enable or Disable).
If this mode is enabled, the port transitions to low power mode during
a link idle condition.
EEE Admin mode
Bonjour settings
A Mac that supports Bonjour can discover the switch in the network so that you can find
the switch IP address and log in to the main UI of the switch. Bonjour is enabled by
default. You can disable Bonjour for security reasons.
Enable or disable Bonjour
To enable or diable Bonjour:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual
121
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual