Configure captive portal users, Add or modify a captive portal user account – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 782

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select Security > Control > Captive Portal > CP Group Configuration.

The CP Group Configuration page displays.

6. From the Group ID menu, select an ID for the group.

You can select an ID from 1 to 10.

7. Select the check box for the group that you want to remove.

8. Click the Delete button.

The group is removed.

9. To save the settings to the running configuration, click the Save icon.

Configure captive portal users

You can configure the settings for captive portal users and add them to a captive portal
group. By default, all captive users are added to the default group with ID 1. After you
add a custom captive portal group (see Configure captive portal groups on page 780),
you can also assign captive portal users to the custom group.

The settings that you can configure for an individual captive portal user include a
password, time-out periods, bandwidths, and maximum traffic amounts.

Add or modify a captive portal user account

You can add a captive portal user account or modify an existing one.

To add or modify a captive portal user account:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.