NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 208
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > LLDP > LLDP > Remote Device Inventory.
The Remote Device Inventory page displays.
6. To search for an interface, enter the interface number in the format 0/x, in which x
is the interface number, in the Search Interface field and click the Go button.
Information about the interface displays.
7. To refresh the page, click the Refresh button.
The following table describes the view-only fields on the page.
Table 51. LLDP remote device inventory information
Description
Field
The interface on the switch on which LLDP information is received.
Port
The remote device ID.
Remote Device ID
The advertised management address of the remote device.
Management Address
The MAC address of the remote device.
MAC Address
The system name of the remote device.
System Name
The interface number of the remote device.
Remote Port ID
The Type-Length-Value (TLV) organizationally unique identifier (OUI) of
the remote device.
OUI
The subtype of the TLV OUI of the remote device.
OUI Subtype
Link Layer Discovery Protocol for
Media Endpoint Devices
Link Layer Discovery Protocol for Media Endpoint Discovery (LLDP-MED) is an
enhancement to LLDP with support for the following features:
•
Auto-discovery of LAN policies (such as VLAN, Layer 2 priority, and DiffServ settings),
which allows for plug-and-play networking.
•
Device location discovery, which allows for the creation of location databases.
Main User Manual
208
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual