NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 676)

This is the user name with which you access the SFTP or SCP server.
13. If you select SFTP or SCP from the Transfer Mode menu, enter the password in the
Password field.
This is the password that is required to access the SFTP or SCP server.
14. Click the Apply button.
The file transfer starts. A status message displays during the transfer and upon
successful completion of the transfer.
15. To save the settings to the running configuration, click the Save icon.
Telnet management access
You can configure Telnet authentication lists and manage outbound and inbound Telnet.
Select Telnet authentication lists
You can select a login authentication list and an enable authentication list:
• Login authentication list: The login list specifies the authentication methods used
to validate switch or port access for the users associated with the list. For more
information, see Configure a login authentication list on page 650.
• Enable authentication list: The enable list specifies the authentication methods
used to validate privileged EXEC access for the users associated with the list. For
more information, see Configure an enable authentication list on page 653.
To configure the Telnet authentication lists:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
Main User Manual 676 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual