Remove a udp interface – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 151
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > UDP Relay > UDP Relay Interface Configuration.
The page UDP Relay Interface Configuration page displays.
6. From the Interface menu, select the interface or VLAN.
7. Change the settings as needed.
For more information about the settings, see Add a UDP interface configuration on
page 149.
8. Click the Apply button.
Your settings are saved.
9. To save the settings to the running configuration, click the Save icon.
Remove a UDP interface
To remove a UDP interface:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select System > Services > UDP Relay > UDP Relay Interface Configuration.
The page UDP Relay Interface Configuration page displays.
6. From the Interface menu, select the interface or VLAN.
7. Click the Delete button.
Main User Manual
151
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual