Add a mac-based vlan configuration, Delete a mac-based vlan configuration – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 244
ingress processing on the packet continues; otherwise the packet is dropped. This
implies that you can manually configure a MAC-address-to-VLAN-ID mapping.
Add a MAC-based VLAN configuration
You can add a MAC-address-to-VLAN-ID mapping, which we refer to as MAC-based
VLAN configuration.
To add a MAC-based VLAN configuration:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > VLAN > Advanced > MAC Based VLAN.
The MAC Based VLAN page displays.
6. In the MAC Address field, type a MAC address that must be bound to a VLAN ID.
7. In the VLAN ID field, specify the VLAN ID in the range of 1 to 4093.
8. Click the Add button.
The MAC-based VLAN configuration is added.
9. To save the settings to the running configuration, click the Save icon.
Delete a MAC-based VLAN configuration
To delete a MAC-based VLAN configuration:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
Main User Manual
244
Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual