NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 934)

Table 191. System features default settings (Continued)
Default Feature Name/Setting
Enabled Port power
Low Port priority
802.3at for PoE+ models
802.3bt for PoE++ models
Power mode
Class Power limit type
90.90 Power limit (W)
4ptdot3af Detection type
None Timer schedule
SNMPv1/v2
None Community configuration
None Trap configuration
SNMPv1/v2 Trap Flags
Enabled Authentication
Enabled Link up/down
Enabled Multiple users
Enabled Spanning tree
Disabled ACL
Disabled Captive portal
Disabled DVMRP
Disabled PIM
Enabled PoE (for PoE+ and PoE++ models only)
All disabled OSPFv2 Traps, Errors
All disabled OSPFv2 Traps, LSA
All disabled OSPFv2 Traps, Overflow
All disabled OSPFv2 Traps, Retransmit
All disabled OSPFv2 Traps, State-change
All disabled OSPFv3 Traps, Errors
All disabled OSPFv3 Traps, LSA
All disabled OSPFv3 Traps, Overflow
Main User Manual 934 Software Default Settings and
Hardware Specifications
Fully Managed Switches M4350 Series Main User Manual