Display the client summary – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 699
Table 164. Port summary information (Continued)
Description
Field
Indicates if key transmission is enabled. If the value is False, key transmission
does not occur. Otherwise, key transmission is supported.
Key Transmission Enabled
The authorization status of the port:
• N/A: If the port is in detached state, the value is N/A because the port cannot
participate in port access control.
• Authorized
• Unauthorized
Port Status
The protocol version is always 2, corresponding to the second version of the
802.1X specification.
Protocol Version
Display the client summary
You can display information about supplicant devices that are connected to the local
authenticator ports. If no active 802.1X sessions exist, the table is empty.
To display the client summary:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Port Authentication > Advanced > Client Summary.
The Client Summary page displays.
6. If a stack is configured, select whether to display the physical interfaces for one switch
or for all switches in the stack:
•
Unit ID for a stacked switch: The physical interfaces for the switch with the
selected stack unit ID are displayed.
Main User Manual
699
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual