NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 752)

6. From the Interface menu, select the interface.
7. In the MAC Address field, specify the MAC address for the binding to be added.
This is the key to the binding database.
8. From the VLAN ID menu, select the ID of the VLAN.
9. In the IPv6 Address field, specify the IPv6 address for the binding to be added.
10. Click the Add button.
The DHCPv6 snooping binding entry is added to the database.
The Dynamic Binding Configuration table shows information about the DHCPv6
bindings that were learned on each interface on which DHCPv6 snooping is enabled.
The following table describes the dynamic binding information.
Description Field
The interface on which the DHCPv6 client message was received. Interface
The MAC address associated with the DHCPv6 client that sent the message. This
is the key to the binding database. MAC Address
The VLAN ID of the client interface. VLAN ID
The IPv6 address assigned to the client by the DHCPv6 server. IPv6 Address
The remaining IP address lease time for the client. Lease Time
11. To save the settings to the running configuration, click the Save icon.
12. To clear all dynamic bindings from the Dynamic Binding Configuration table, click
the Clear button.
13. To save the settings to the running configuration, click the Save icon.
Remove a static DHCPv6 binding
You can remove a static binding from the DHCPv6 snooping bindings database.
To remove a static DHCPv6 binding:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
Main User Manual 752 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual