beautypg.com

Configure an ipv6 management vlan – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 84

background image

The IPv6 address is removed from the IPv6 service port.

8. To save the settings to the running configuration, click the Save icon.

Configure an IPv6 management VLAN

For you to manage the switch over the main UI, you must define the management IP
address. A management VLAN interface is created by default and it gets an IP address
if a DHCP server is present. If the management VLAN interface cannot get an IP address,
the automatically assigned fallback IPv4 address is 169.254.100.100 and the subnet
mask is 255.255.0.0.

A management VLAN is used as the default source interface for the syslog, the message
log, an SNMP client, and so on. The network interface is disabled by default.

The management VLAN is the logical interface used for in-band connectivity with the
switch through any of the switch’s front panel ports. The configuration parameters
associated with the switch’s management VLAN do not affect the configuration of the
front panel ports through which traffic is switched or routed.

To access the switch over a network you must first configure an IP address and subnet
mask for the switch. You can configure the IP information using any of the following:

DHCP

Terminal interface through the EIA-232 port

After you establish in-band connectivity, you can change the IP information using any
of the following:

Terminal interface through the EIA-232 port

Terminal interface through Telnet

SNMP-based management

Web-based management

To configure an IPv6 management VLAN, you can either use the same VLAN that is used
for IPv4 management or a different VLAN. The switch does not provide a default IPv6
management VLAN. If you want to use one, you must create it manually.

To configure an IPv6 management VLAN or reset the IPv6 management VLAN:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

Main User Manual

84

Configure Switch System
Information

Fully Managed Switches M4350 Series Main User Manual