beautypg.com

Remove a static dhcp binding – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 744

background image

This is the key to the binding database.

8. From the VLAN ID menu, select the ID of the VLAN.

9. In the IP Address field, specify the IP address for the binding to be added.

10. Click the Add button.

The DHCP snooping binding entry is added to the database.

The Dynamic Binding Configuration table shows information about the DHCP
bindings that were learned on each interface on which DHCP snooping is enabled.
The following table describes the dynamic binding information.

Description

Field

The interface on which the DHCP client message was received.

Interface

The MAC address associated with the DHCP client that sent the message. This is
the key to the binding database.

MAC Address

The VLAN ID of the client interface.

VLAN ID

The IP address assigned to the client by the DHCP server.

IP Address

The remaining IP address lease time for the client.

Lease Time

11. To save the settings to the running configuration, click the Save icon.

12. To clear all dynamic bindings from the Dynamic Binding Configuration table, click

the Clear button.

13. To save the settings to the running configuration, click the Save icon.

Remove a static DHCP binding

You can remove a static binding from the DHCP snooping bindings database.

To remove a static DHCP binding:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

Main User Manual

744

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual