Deactivate an access profile – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 687
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays.
The Packets Filtered field displays the number of packets filtered.
6. To refresh the page with the latest information about the switch, click the Refresh
button.
The following table describes the view-only fields on the page..
Table 163. Access profile configuration profile summary
Description
Field
The action performed when the rules match.
Rule Type
The service type selected. The policy is restricted by the selected service type.
Service Type
The source IP address of the client originating the management traffic.
Source IP Address
The subnet mask of the IP Address.
Mask
The priority of the rule.
Priority
Deactivate an access profile
You can deactivate an access profile.
To deactivate an access profile:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
Main User Manual
687
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual