beautypg.com

Set the stack sample mode – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 40

background image

Set the stack sample mode

The stack sample mode defines how the timestamps of the heartbeat messages between
the stack members are computed. These heartbeat messages allow all members of the
stack to remain synchronized. The stack sample mode and, if configured, sample size
are applied to all members in the stack.

To set the stack sample mode:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Stacking > Basic > Stack Configuration.

The Stack Configuration page displays. The page shows different sections.

6. In the Stack Sample Mode section, from the Sample Mode menu, select the mode:

Cumulative: Tracks the sum of received timestamp offsets cumulatively.

History: Tracks the history of received timestamps.

7. If you select History from the Sample Mode menu, in the Max samples field, type

the maximum number of samples to keep.

The range is from 100 to 500 samples.

8. Click the Apply button.

Your settings are saved.

9. To save the settings to the running configuration, click the Save icon.

Main User Manual

40

Manage Stacking

Fully Managed Switches M4350 Series Main User Manual