NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 784)

12. In the Idle Timeout field, enter the period in seconds that the switch waits before
terminating an idle session and logging out the user.
The default is 0, which means that an idle session does not time out. The range is
from 0 to 900 seconds.
13. In the Max Bandwidth Down field, enter the maximum rate, in bits per second, at
which a client can receive data from the network.
A value of 0 indicates that the global configuration must be used. The range is from
0 to 536870911 bps.
14. In the Max Bandwidth Up field, enter the maximum rate, in bits per second, at which
a client can send data into the network.
A value of 0 indicates that the global configuration must be used. The range is from
0 to 536870911 bps.
15. In the Max Input field, enter the number of octets the user is allowed to receive.
After this limit is reached, the user is disconnected. A value of 0 indicates that the
global limit must be used. The range is from 0 to 4294967295.
16. In the Max Output field, enter the number of octets the user is allowed to transmit.
After this limit is reached, the user is disconnected. A value of 0 indicates that the
global limit must be used. The range is from 0 to 4294967295.
17. In the Max Total field, enter the number of bytes the user is allowed to transmit and
receive.
The maximum number of octets is the sum of octets transmitted and received. After
this limit is reached, the user is disconnected. A value of 0 indicates that the global
limit must be used. The range is from 0 to 4294967295.
18. Do one of the following:
• If you are adding a new user account, click the Add button.
Your settings are saved. The user account is added.
• If you are changing the settings for a user account, click the Apply button.
Your settings are saved.
19. To save the settings to the running configuration, click the Save icon.
Delete a captive portal user account
You can delete a captive portal user account that is no longer required.
To delete a captive portal user account:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual 784 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual