NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 868
Configure the switch as an RSPAN
destination switch
You can configure the switch as an RSPAN destination switch that receives traffic from
another switch that functions as an RSPAN source switch.
You can create up to four RSPAN destination switch configurations.
To configure the switch as an RSPAN destination switch:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Monitoring > Mirroring > RSPAN Destination Switch Configuration.
The RSPAN Destination Switch Configuration page displays.
6. From the Session ID menu, select 1, 2, 3, or 4 as the RSPAN destination switch
session ID.
You can set up four RSPAN destination switch configurations that functions
independently from each other.
7. Enable or disable the RSPAN destination switch configuration by selecting one of
the following Admin Mode radio buttons:
•
True: Traffic from the selected RSPAN source VLAN is copied (mirrored) to the
selected RSPAN destination port.
•
False: Traffic from the selected RSPAN source VLAN is not mirrored.
8. From the RSPAN Source VLAN menu, select the RSPAN source VLAN from which
traffic must be copied.
9. From the RSPAN Destination Port menu, select the RSPAN destination port to which
traffic must be copied.
Main User Manual
868
Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual