beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 92

background image

To add or remove an IPv6 default route address for the IPv6 management interface:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Management > Management Interfaces > IPv6 Management

Interface Configuration.

The IPv6 Management Interface Configuration page displays.

6. To add an IPv6 default route address, in the IPv6 Default Route Configuration section,

do the following:

a. Select the Change IPv6 Default Route check box.

b. In the IPv6 Default Route Address field, specify the IPv6 address and prefix

length that you want to add.

c. Click the Add button.

The IPv6 default route address is added to the IPv6 management interface.

7. To remove an IPv6 default route address, in the IPv6 Default Route Configuration

section, do the following:

a. Select the check box for the IPv6 default route address that you want to remove.

b. Click the Delete button.

The IPv6 default route address is removed from the IPv6 management interface.

8. To save the settings to the running configuration, click the Save icon.

Main User Manual

92

Configure Switch System
Information

Fully Managed Switches M4350 Series Main User Manual