beautypg.com

NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 53

background image

a. From the Clear Counters menu, select a unit ID, or select All.

b. Click the Apply button.

The counters are cleared.

9. To save the settings to the running configuration, click the Save icon.

Display stack port diagnostic, status, and
path information

Stack port diagnostics lets you view diagnostic, status, and path information about a
stack port.

To run stack port diagnostics:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select System > Stacking > Advanced > Stack-port Diagnostics.

The Stack-port Diagnostics page displays.

6. In the Stack-port Diagnostics section, to display the diagnostic information for a

specific stacked switch, select the unit ID for the stacked switch, or select the All link
to display diagnostic information for all stacked switches.

The ports for the selected switch or switches display.

For each stack port, the Port Diagnostics Info field displays diagnostic and status
information.

7. In the Stack-port packet-path section, to display information about the packet path

between stack ports, select the unit ID for the stacked switch, or select the All link
to display diagnostic information for all stacked switches.

Main User Manual

53

Manage Stacking

Fully Managed Switches M4350 Series Main User Manual