NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 528)

The following tables describe the view-only fields on the page.
Description Field
The IP address that is used with the source mask to identify the source network Source IP
The network mask used with the source IP address Source Mask
The next hop’s interface that connects to the switch’s interface Next Hop Interface
The next hop type: Leaf means that no downstream dependent neighbors exist on
the outgoing interface. Otherwise, the type is branch.
• Leaf: No downstream dependent neighbors exist on the next hop interface
• Branch: Downstream dependent neighbors do exist on the next hop interface
Type
View the DVMRP prune table
If DVMRP is enabled, you can view DVMRP prune table, which shows the multicast group
IP addresses that were removed from the multicast delivery tree because they no longer
serve any multicast members.
To view the DVMRP prune table:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > DVMRP > DVMRP Prune.
The DVMRP Prune page displays.
6. To refresh the page, click the Refresh button.
The following tables describe the view-only fields on the page.
Main User Manual 528 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual