NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 808)

Configure rules for a basic IP ACL
You can define rules for IP-based standard ACLs (basic ACLs). The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally
or discarded.
NOTE: An implicit deny all rule is included at the end of an ACL list. This means
that if an ACL is applied to a packet, and if none of the explicit rules match,
then the final implicit deny all rule applies and the packet is dropped.
Add a rule for a basic IPv4 ACL
You can add a rule for a basic IPv4 ACL.
To add a rule for a basic IPv4 ACL:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > ACL > Advanced > IP Rules.
Main User Manual 808 Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual