NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 527)

(Continued)
Description Field
The DVMRP generation ID for the neighbor as detected by the interface. Generation ID
The DVMRP major version for the neighbor as detected by the interface. For example,
if the neighbour is running version 3 of DVMRP, the major version is set as 0x03 and
the minor version is set as 0xFF. Major Version
The DVMRP minor version for the neighbor as detected by the interface. Minor Version
The DVMRP capabilities of the neighbor as detected by the interface. Capabilities
The number of routes received for the neighbor as detected by the interface. Received Routes
The number of invalid packets received for the neighbor as detected by the interface. Received Bad Packets
The number of invalid routes received for the neighbor as detected by the interface. Received Bad Routes
View the DVMRP next hops
If DVMRP is enabled, you can view DVMRP the next hops.
To view the DVMRP next hops:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > Multicast > DVMRP > DVMRP Next Hop.
The DVMRP Next Hop page displays.
NOTE: If you select to display all pages instead of a limited number, it
might take a while before the information is displayed.
6. To refresh the page, click the Refresh button.
Main User Manual 527 Configure Multicast Routing
Fully Managed Switches M4350 Series Main User Manual