NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 429)

• If you are adding a new routing VLAN, click the Add button.
Your settings are saved. The routing VLAN is added.
• If you are changing an existing routing VLAN, click the Apply button.
Your settings are saved.
11. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 111. VLAN routing configuration information
Description Field
The interface for the routing VLAN. Port
The MAC address of the interface for the routing VLAN. MAC Address
Remove the routing function from a VLAN
You can remove the routing function from a VLAN. That is, you can remove the routing
IP address and subnet mask from the VLAN. The VLAN itself is not removed.
To remove the routing function from a VLAN:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Routing > VLAN > VLAN Routing Configuration.
The VLAN Routing page displays.
6. Select the check box for the VLAN.
7. Click the Delete button.
Main User Manual 429 Manage Routing
Fully Managed Switches M4350 Series Main User Manual