beautypg.com

Configure outbound telnet settings – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 678

background image

This selection specifies if the switch accepts

any

inbound Telnet sessions. By

default, the Enable radio button is selected.

b. Next to Allow new telnet sessions, select the Disable or Enable radio button.

This selection specifies if the switch accepts

new

Telnet sessions, that is, new in

addition to a current Telnet session. By default, the Enable radio button is
selected. If you disable this option, an established session remains active until
the session is ended, after which no new Telnet session can be established.

c. In the Session Timeout (Minutes) field, specify the time in minutes after which

an inactive Telnet session is automatically ended.

The range is from 1 to 160 minutes. The default is 5 minutes.

d. In the Maximum Number of Sessions field, specify how many simultaneous

inbound Telnet sessions are allowed.

The maximum is 5, which is also the default.

7. Click the Apply button.

Your settings are saved.

The Current Number of Sessions field in the Inbound Telnet section displays the
number of current inbound Telnet sessions.

8. To save the settings to the running configuration, click the Save icon.

Configure outbound Telnet settings

If you enable outbound Telnet sessions and allow new Telnet sessions to be established,
authorized users can establish new Telnet sessions from the switch to another device
until the maximum number of Telnet sessions is exceeded. An established Telnet session
remains active until the session is ended or the session time-out period is exceeded.

To configure the outbound Telnet settings:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

Main User Manual

678

Manage Switch Security

Fully Managed Switches M4350 Series Main User Manual