NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 345)

Table 84. MVR statistics information (Continued)
Definition Field
The number of transmitted IGMP V2 reports. IGMP Report V2 Transmitted
The number of transmitted IGMP leaves. IGMP Leave Transmitted
The number of IGMP packet receive failures. IGMP Packet Receive Failures
The number of IGMP packet transmit failures. IGMP Packet Transmit Failures
MAC address table
You can view or configure the MAC address table. This table contains information about
unicast entries for which the switch holds forwarding or filtering information. This
information lets the transparent bridging function determine how an incoming frame
must be propagated.
View, search, or clear the MAC address table
If you clear the MAC address entries in the MAC address table, only the dynamic entries
are removed.
To view, search, or clear the MAC address table:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > Address Table > Basic > Address Table.
The Address Table page displays.
Main User Manual 345 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual