beautypg.com

Configure the diffserv service interface, Attach diffserv policies to an interface – NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual

Page 620

background image

The Policy Configuration page displays.

6. Select the check box next to the policy name.

7. Click the Delete button.

The policy is removed.

8. To save the settings to the running configuration, click the Save icon.

Configure the DiffServ service interface

You can assign (attach) both an inbound policy and an outbound policy to an interface.

Attach DiffServ policies to an interface

You can attach an inbound policy, outbound policy, or both types of policies to an
interface.

To attach DiffServ policies to an interface:

1. Launch a web browser.

2. In the address field of your web browser, enter the IP address of the switch.

If you do not know the IP address of the switch, see Log in to the main UI with a web
browser
on page 27 and the subsections.

The login page displays.

3. Click the Main UI Login button.

The main UI login page displays in a new tab.

4. Enter admin as the user name, enter your local device password, and click the Login

button.

The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.

The System Information page displays.

5. Select QoS > DiffServ > Advanced > Service Interface Configuration.

The Service Interface Configuration page displays.

6. Select whether to display physical interfaces, LAGs, or both by clicking one of the

following links above the table heading:

1 or Unit ID for a stacked switch:

Main User Manual

620

Configure Quality of Service

Fully Managed Switches M4350 Series Main User Manual