NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 497
8. The options in the Default Information Originate section of the table let you configure
the switch to advertise a default route into the NSSA when the import of summary
LSAs is disabled:
a. From the Admin Mode menu, select Enable to let the switch advertise a default
route or Disable to prevent the switch from doing so.
b. In the Metric Value field, set the metric value for the default route.
The range is from 1 to 16777214.
c. From the Metric Type menu, select the type of metric that must used in the
default route:
• Comparable Cost: External type 1 metrics that are comparable to the OSPFv3
metric
• Non-comparable Cost: External type 2 metrics that are assumed to be larger
than the cost of the OSPFv3 metric.
9. From the Translator Role menu, select the role of the NSSA:
•
Always: The switch assumes the role of the translator when it becomes a border
router.
•
Candidate: The switch participates in the translator election process when it
attains border router status.
10. In the Translator Stability Interval field, enter the period during which the switch
extends its translator role after another device becomes the translator.
The range is from 0 to 3600 minutes.
11. From the Redistribute Mode menu, select if learned external routes are redistributed:
•
Enable: The NSSA ABR distributes learned external routes to the NSSA.
•
Disable: The NSSA ABR does not distribute learned external routes to the NSSA.
12. Click the Add button.
The area is added as an NSSA area.
13. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Description
Field
The number of times that the intra-area route table was calculated using this area’s
link state database. (This is typically calculated using Dijkstra’s algorithm.)
SPF Runs
The total number of area border routers that re reachable within this area. This is
initially zero, and is calculated in each SPF pass.
Area Border Router
Count
The total number of link state advertisements in this area’s link state database, excluding
AS external LSAs.
Area LSA Count
Main User Manual
497
Configure OSPF and OSPFv3
Fully Managed Switches M4350 Series Main User Manual