NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 282)

16. Click the Apply button.
Your settings are saved.
17. To save the settings to the running configuration, click the Save icon.
The following table describes the view-only fields on the page.
Table 64. STP configuration and status information
Description Field
STP Configuration
The identifier for the STP configuration. Configuration Digest Key
The version of the configuration format for the exchange of BPDUs. Configuration Format Selector
STP Status
The multiple spanning tree (MST) or common spanning tree (CST) instance. MST ID
The VLAN ID (VID). VID ID
The filtering ID (FID). FID ID
Configure the CST settings and display the
CST status
You can configure common spanning tree (CST) and display the CST status on the
switch.
To configure the CST settings and display the CST status:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Switching > STP > Advanced > CST Configuration.
Main User Manual 282 Configure Switching Information
Fully Managed Switches M4350 Series Main User Manual