NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 862
a transmitted packet, the copied packet is VLAN-tagged or untagged as it is being
transmitted on the source port.
To set up a port mirroring configuration:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Monitoring > Mirroring > Multiple Port Mirroring.
The Multiple Port Mirroring page displays.
6. From the Session ID menu, select 1, 2, 3, or 4 as the port mirroring session ID.
You can set up four port mirroring configurations that functions independently from
each other.
7. Enable or disable the port mirroring configuration by selecting one of the following
Admin Mode radio buttons:
•
True: The selected source interfaces are mirrored. That is, traffic entering or
leaving the source interfaces is copied (mirrored) to the selected destination
port.
•
False: The selected source interfaces are not mirrored.
8. From the Destination Port menu, select the destination interface to which traffic
must be copied.
For each port mirroring configuration, you can configure one destination port only.
The default is None.
9. From the Filter Type menu, select if traffic must be filtered:
•
None: All traffic is mirrored.
•
IP ACL: Traffic is filtered according to the IP ACL for which you must type the
name in the Filter Name field. Only traffic that matches the rules in the IP ACL is
mirrored to the destination port.
Main User Manual
862
Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual