NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 662
To configure the HTTPS access settings:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Log in to the main UI with a web
browser on page 27 and the subsections.
The login page displays.
3. Click the Main UI Login button.
The main UI login page displays in a new tab.
4. Enter admin as the user name, enter your local device password, and click the Login
button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The System Information page displays.
5. Select Security > Access > HTTPS > HTTPS Configuration.
The HTTPS Configuration page displays.
6. Select the Admin Mode Disable or Enable radio button:
•
Disable: You cannot access the switch device UI from an HTTPS session over a
web browser.
NOTE: You can download SSL certificates only when HTTPS is disabled.
•
Enable: You can access the switch device UI from an HTTPS session over a web
browser. This is the default setting.
The Operational Status field shows if HTTPS is operationally enabled or disabled.
For example, if all certificates expire, HTTPS is operationally disabled.
The TLS Version field shows the TLS version, which is always 1.2.
7. In the HTTPS Port field, specify the HTTPS port number.
The valid range is from 1025 to 65535. The default port number is 443.
8. In the HTTPS Session Soft Timeout (Minutes) field, specify the number of minutes
an HTTPS session can be idle before a time-out occurs.
The value must be in the range from 0 to 60 minutes. The default value is 15 minutes.
After the session is inactive and times out, you are automatically logged out and
must reenter the password to access the device UI. A value of zero means that the
session does not time out.
9. In the HTTPS Session Hard Timeout (Hours) field, specify the hard time-out for
HTTPS sessions.
Main User Manual
662
Manage Switch Security
Fully Managed Switches M4350 Series Main User Manual