NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch User Manual
Page 191
•
Another VLAN ID: The primary IP address of a VLAN other than VLAN 1 is used
as the source address.
•
Routing interface: The primary IP address of a routing interface is used as the
source address.
•
Routing VLAN: The primary IP address of a VLAN routing interface is used as
the source address.
•
Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
•
Different: For some features,
Different
can display. This means that the source
interface is configured separately.
7. In the Community Name field, specify the name of the SNMP community that
includes the SNMP management host and the SNMP agent on the device.
This name can be up to 16 characters and is case-sensitive.
8. From the Version menu, select the SNMP version to be used by the receiver:
•
SNMPv1: The switch uses SNMPv1 to send traps to the receiver. The default
setting is SNMPv1.
•
SNMPv2: The switch uses SNMPv2 to send traps to the receiver.
9. From the Protocol menu, select the protocol to be used by the receiver:
Select IPv4 if the receiver's address is an IPv4 address or IPv6 if the receiver's address
is an IPv6 address. Or, you can select DNS and enter a domain name.
10. In the Address field, enter the IPv4 or IPv6 address or the domain name, depending
on your selection from the Protocol menu.
11. From the Status menu, select to enable or disable the trap:
•
Enable: The trap is enabled.
•
Disable: The trap is configured but disabled.
12. Click the Add button.
The trap configuration is added.
13. To save the settings to the running configuration, click the Save icon.
Change an SNMPv1 or SNMPv2 trap configuration for
a host
You can change an existing SNMPv1 or SNMPv2 trap configuration for a host.
To change an SNMPv1 or and SNMPv2 trap configuration for a host:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
Main User Manual
191
Configure Switch System
Information
Fully Managed Switches M4350 Series Main User Manual