NETGEAR M4350-24F4V 24-Port 10G SFP+ Managed AV Network Switch - Manual (Page 854)

5. Select Monitoring > Logs > Server Log.
The Server Log page displays.
6. Select one of the following Admin Status radio buttons:
• Enable: The switch sends log messages to all configured syslog servers.
• Disable: The switch stops sending log messages all configured syslog servers.
7. In the Local UDP Port field, specify the port number that the switch uses to send
log messages to the syslog servers.
The range is from 1 to 65535. The default port is 514.
8. From the Source Interface menu, select the source interface or VLAN that must be
used for syslog communication. By default, the following options display in the menu:
• None: The primary IP address of the originating (outbound) interface is used as
the source address.
• VLAN 1: The primary IP address of VLAN 1 is used as the source address. This is
the default selection.
• Service Port: The management port IP address is used as the source address.
Depending on the configuration of your switch, the following options can display:
• Another VLAN ID: The primary IP address of a VLAN other than VLAN 1 is used
as the source address.
• Routing interface: The primary IP address of a routing interface is used as the
source address.
• Routing VLAN: The primary IP address of a VLAN routing interface is used as
the source address.
• Routing loopback interface: The primary IP address of a routing loopback
interface is used as the source address.
• Different: For some features, Different can display. This means that the source
interface is configured separately.
NOTE: The syslog function on the switch can save the log messages
simultaneously to a remote server and to a USB storage device.
9. To simultaneously save the log messages to a USB storage device, in the USB
Filename field, specify the name of the USB file.
The file name cannot include the following symbols: V:*?”<>!. Up to 64 characters
can be entered. The 64 characters are only the file name length, the extension is
automatically added.
10. Click the Apply button.
Main User Manual 854 Monitor the Switch and Network
Fully Managed Switches M4350 Series Main User Manual